Supersaturated Roscopaint  0.95litres  xxColour Supersaturated Roscopaint 0.95litres xxColour
4.5 stars - "Review for Supersaturated Roscopaint 0.95litres xxColour" This Supersaturated Roscopaint 0.95litres xxColour is the best Floor and Scenery Treatments I have tried.
  • Supersaturated Roscopaint  0.95litres  xxColour - Image 1
  • Supersaturated Roscopaint  0.95litres  xxColour - Image 1
Rosco

Supersaturated Roscopaint 0.95litres xxColour

Product ID: 150059xx0032
Brand: Rosco

View or buy the Floor and Scenery Treatments Stage Enhancement - Supersaturated Roscopaint 0.95litres xxColour from Rosco to discover other options and shipping details.

Description

Rosco
Supersaturated   Roscopaint™   0.95litres   xxColour

Is a unique acrylic paint, packaged in concentrated form.  It is designed to be diluted with water, at least 1:1 and as much as 15:1.  With such tremendous extendibility, Supersaturated offers the widest range of effects possible while being extremely economical to use.  On porous and non-porous surfaces, Supersaturated achieves vibrant, opaque color fields.  It also creates bright, translucent washes where the color remains as intense as aniline dyes, without the health hazards associated with dyes.  Supersaturated Roscopaint is formulated with a unique binder that gives it superior adhesion, durability, and flexibility even on difficult surfaces like Rosco Projection Screens and Rosco Dance Floors.  It can also be used as a tint for other paints, binders and coatings.  Perfect for both interior and exterior projects.

Available in 29 artists' colors that are easily intermixed or combined with other Rosco paints.

Finish: Matte

Solvent: Water

Binder Type: Acrylic co-polymer

Dilution: Dilute at least 1:1with water, Rosco Clear Acrylic Glaze or a combination of the two as necessary.  Diluting will reduce the color concentration and create "glaze" effects.  Diluting with more than 5 parts water may reduce binder strength.  Add in Rosco Clear Acrylic Glaze to restore adhesion and flexibility.

Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

Application: Stir contents before use.  Do not shake.  Apply by brush, roller, or spray gun.  Apply in thin uniform coats, using a good quality brush or roller.  Use overlapping strokes, keeping a wet edge.  Change roller direction often to avoid patterns and streaking.

Film Thickness: 1:1 Dilution = 1.5 mil. Dry Film

Coverage: 3:1 Dilution = Approx. 300 sq. ft. per gallon / 3.79litres.

Avg. Dry Time: At 75°F (24°C). Dries to the touch in 30 minutes. Can be recoated in 1-2 hours.

Clean-up Soap and water.

Shelf Life Minimum 24 months.

Packaging:   1 Quart/0.95litre Cans. 1 Gallon/3.79litres and 5 gallon/19litres available.

Click here for Rosco Supersaturated Colour Chart.

Product Numbers

#05969   Ultramarine Blue
#05971   Chrome Green
#05972   Emerald Green
#05976   Brilliant Red
#06001   Neutral Base*
#06002   White*
#06003   Velour Black*

CAUTIONS:
Do not apply when surface or air temperatures are below 50°F, 10°C.  
Keep from freezing.  
Avoid prolonged contact with skin or breathing of spray.  
Do not take internally.
Use adequate ventilation.
KEEP OUT OF REACH OF CHILDREN.

All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

More Floor and Scenery Treatments and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware